-
Disperser and filling machine were shipped to Kosovo
Time: September 12, 2024.
Location: Kosovo, Serbia.
Event: On September 12, 2024, CORINMAC disperser and filling machine were delivered to Kosovo, Serbia.
Disperser is designed to mix medium hard materials in liquid media. Dissolver is used for the production of paints, adhesives, cosmetic products, various pastes, dispersions and emulsions, etc.
Dispersers can be made in various capacities. Parts and components in contact with the product are made of stainless steel. At the request of the customer, the equipment can still be assembled with an explosion-proof drive.
The disperser is equipped with one or two stirrers - high-speed gear type or low-speed frame. This gives advantages in the processing of viscous materials. It also increases productivity and the quality level of dispersion. This design of the dissolver allows you to increase the filling of the vessel up to 95%. Filling with recyclable material to this concentration occurs when the funnel is removed. In addition, heat transfer is improved.
-
Automatic packing and palletizing equipment was delivered to Almaty, Kazakhstan
Time: September 12, 2024.
Location: Almaty, Kazakhstan.
Event: On September 12, 2024, CORINMAC automatic packing and palletizing equipment was delivered to Almaty, Kazakhstan.
The automatic packing and palletizing equipment including 2 sets of automatic packing machine, column palletizer, pallet wrapping machine, conveyor, control cabinet, screw air compressor and accessories, etc.
Column palletizer can also be called Rotary palletizer, Single Column palletizer, or Coordinate palletizer, it is the most concise and compact type of palletizer. The Column Palletizer can handle bags containing stable, aerated or powdery products, permitting partial overlapping of the bags in the layer along both the top and sides, offering flexible format changes. Its extreme simplicity makes it possible to palletise even on pallets sitting directly on the floor.
-
Sand drying production line was shipped to Irkutsk, Russia
Time: September 6, 2024.
Location: Irkutsk, Russia.
Event: On September 6, 2024, CORINMAC sand drying production line was shipped to Irkutsk, Russia.
The whole set of sand drying production line equipment including wet sand hopper, burning chamber, three cylinder rotary dryer, and accessories, etc.
CORINMAC mainly manufactures dryers with two structures, three-cylinder rotary dryer and single cylinder rotary dryer, with multiple patents, such as multi-bend lifting plates, spiral anti-stick inner cylinders, etc.
The rotary dryer usually forms a drying and screening production line with raw material hopper, belt feeder, conveyors, vibrating screen and dust collector. It can be used alone to dry various materials or combined with a dry mortar mixing line to form a complete set of dry mortar production line including finished sand drying.
Container loading photos are as follows:
-
Palletizing Line was Sent to Russia
Time: August 22, 2024.
Location: Russia.
Event: On August 22, 2024, CORINMAC palletizing line was sent to Russia.
The palletizing line equipment including automatic palletizing robot, conveyor, control cabinet and automatic pallet feeder, etc.
Automatic palletizing robot, also known as a palletizing robot arm, is a programmable mechanical device used to automatically stack and palletize products of different types and sizes on a production line. It can efficiently pallet products according to preset procedures and process requirements, and has the characteristics of fast, accurate and stable.
-
Slag Drying and Mixing Production Line was Delivered to Kokshetau, Kazakhstan
Time: August 19, 2024.
Location: Kokshetau, Kazakhstan.
Event: On August 19, 2024, CORINMAC drying and mixing production line was delivered to Kokshetau, Kazakhstan.
The slag drying and mixing production line including 10 tons/hour drying production line and 5 tons/hour mixing production line and palletizing line.
Container loading photos are as follows:
-
Dry mortar production line was shipped to Kenya
Time: August 6, 2024.
Location: Kenya.
Event: On August 6, 2024, CORINMAC dry mortar production line was shipped to Kenya.
The whole set of dry mortar production line equipment including 2m³ single shaft paddle mixer, finished product hopper, screw conveyor, dust collector, air compressor, electric control cabinet, packing machine, and accessory parts, etc.
Container loading photos are as follows:
-
JY-4 Paddle Mixer Mixing Plant was Delivered to Malaysia
Time: July 23, 2024.
Location: Malaysia.
Event: On July 23, 2024, CORINMAC JY-4 paddle mixer mixing plant was delivered to Malaysia.
The whole set of mixing plant equipment including JY-4 paddle mixer, finished product hopper, ton bag un-loader, screw conveyor, control cabinet, packing machine, and accessory parts, etc.
Container loading photos are as follows:
-
Grinding equipment was shipped to Kyrgyzstan
Time: June 29, 2024.
Location: Kyrgyzstan.
Event: On June 29, 2024, CORINMAC grinding equipment was shipped to Kyrgyzstan.
Grinding equipment is widely used in the grinding and processing of mineral products in the fields of building materials, mining, metallurgy, chemical industry and so on.
CORINMAC's milling equipment includes Raymond mill, Super fine powder mill, and Ball mill. The feeding particle size can reach 25mm, and the finished powder particle size can vary from 100 mesh to 2500 mesh according to requirements.
In the field of dry mortar production, there are often some materials that need to be milled to meet the production requirements of dry powder mortar, and the mill that CORINMAC can provide is just fill this gap, Super fine powder mill and Raymond mill are well received by users.
-
2 sets of 25TPH dry mortar production lines were shipped to Yerevan, Armenia
Time: June 18, 2024.
Location: Yerevan, Armenia.
Event: On June 18, 2024, CORINMAC 2 sets of 25TPH dry mortar production lines were shipped to Yerevan, Armenia.
The whole set of dry mortar production line equipment including screw conveyor, weighing hopper, single shaft paddle mixer, finished product hopper, control cabinet, packing machine, and screw compressor, etc.
The capacity of the dry mortar production line is 25 tons per hour, which can meet the customer's production needs. We will continue to provide customers with higher quality and more reliable products.
-
1m³ single shaft paddle mixer was delivered to Shymkent, Kazakhstan
Time: June 12, 2024.
Location: Shymkent, Kazakhstan.
Event: On June 12, 2024, CORINMAC 1m³ single shaft paddle mixer, bucket elevator, screw conveyor, packing machine, and filter press, etc were delivered to Shymkent, Kazakhstan.
The mixer is the core equipment of the dry mortar production line. The material of the mixer equipment could be customized according to user needs, such as SS201, SS304 stainless steel, wear-resistant alloy steel, etc.
We will provide each customer with customized production solutions to meet the requirements of different construction sites, workshops and production equipment layout.
-
3-5TPH dry mortar production line equipment was delivered to Yekaterinburg, Russia
Time: June 7, 2024.
Location: Yekaterinburg, Russia.
Event: On June 7, 2024, CORINMAC 3-5TPH dry mortar production line equipment was delivered to Yekaterinburg, Russia.
The whole set of dry mortar production line equipment including JYW-2 paddle mixer machine, ton bag un-loader, electric hoist, screw conveyor, finished product hopper, TD250x7m bucket elevator, electric control cabinet, and packaging machine, etc.
CORINMAC is professional dry mortar production line manufacturer. We are committed to finding the best solutions for our customers by providing high-quality equipment and high-level production lines to help customers achieve growth and breakthroughs.
-
Sand drying production line was shipped to Donetsk, Russia.
Time: May 20, 2024.
Location: Donetsk, Russia.
Event: On May 20, 2024, CORINMAC sand drying production line equipment was shipped to Donetsk, Russia.
The drying production line is a complete set of equipment for heat drying and screening sand or other bulk materials. It consists of the following parts: wet sand hopper, belt feeder, belt conveyor, burning chamber, rotary dryer (three-cylinder dryer, single-cylinder dryer), cyclone, pulse dust collector, draught fan, vibrating screen, and electronic control system.
The three-cylinder rotary dryer is well received by users because of its high drying efficiency and low energy consumption. The dryers can be selected from a wide range of capacity, from 3TPH to 60TPH.
Because sand is the most commonly used raw material for dry mortars, the drying production line is often used in conjunction with the dry mortar production line.
- Share:
